Overview
The sturdy on-table boundary layer microphone MEB 114 constitutes an improvement for any conferencing system. In its –S version it additionally features a programmable microphone button (PTT, PTM, toggle ON/off, permanent on), and a bi-color LED ring for status indication. A camera or media control system can be triggered via the TTL logic out on the bottom side. Thanks to its rugged housing and its high-quality microphone capsule the MEB 114 ensures the best speech intelligibility.
Features
- Microphone modes
- Toggle on/off
- Push to mute
- Push to talk
- permanent on (external LED control)
Technical Data
Dimensions: 85 x 100 x 25 mm (WxDxH)
Connector: clip contact, trigger signal at the logic connector: Logic in (LED control), GND, Logic out (switch signal)
Frequency response: 40 Hz – 20 kHz
Max. sound pressure level: 140 dB
Transducer principle: pre-polarized condenser microphone
Weight: 291 g
Pick-up pattern: cardioid
Nominal impedance: 200 Ohm
Phantom powering: P 24 - P 48
Operating temperature: -10 ° … +50 °C
Equivalent noise level: 29 dB (A)
Equivalent noise level weighted as per CCIR 468-3: 39 dB (CCIR)
Current consumption: 5.3 mA
Output voltage;
Logic out: high level output voltage > 2.4 V, low level output voltage < 0.4 V
Logic in: high level input voltage > 2.0 V, low level input voltage < 0.8 V
Acoustics: boundary layer microphone
Colour: LED light ring: red / green
Dynamic range: 111 dB (A)
Sensitivity: 10 mV/Pa
What's in the box?
MEB 114 Microphone
Quickguide
Cable
Sennheiser MEB 114-S B Condenser Masa Tipi Mikrofon Müşteri Yorumları
toplam 0 yorum
Henüz yorum yok
Bu ürün için henüz yorum yapılmamış. İlk yorumu yaparak diğer kullanıcılar ile paylaşabilirsin.