Sennheiser MEB 114-S B Condenser Masa Tipi Mikrofon

Overview

The sturdy on-table boundary layer microphone MEB 114 constitutes an improvement for any conferencing system. In its –S version it additionally features a programmable microphone button (PTT, PTM, toggle ON/off, permanent on), and a bi-color LED ring for status indication. A camera or media control system can be triggered via the TTL logic out on the bottom side. Thanks to its rugged housing and its high-quality microphone capsule the MEB 114 ensures the best speech intelligibility.

Features

• Microphone modes
• Toggle on/off
• Push to mute
• Push to talk
• permanent on (external LED control)
  

Technical Data

Dimensions: 85 x 100 x 25 mm (WxDxH)   
Connector: clip contact, trigger signal at the logic connector: Logic in (LED control), GND, Logic out (switch signal)   
Frequency response: 40 Hz – 20 kHz   
Max. sound pressure level:    140 dB   
Transducer principle: pre-polarized condenser microphone   
Weight: 291 g
Pick-up pattern: cardioid   
Nominal impedance: 200 Ohm   
Phantom powering: P 24 - P 48   
Operating temperature: -10 ° … +50 °C   
Equivalent noise level: 29 dB (A)   
Equivalent noise level weighted as per CCIR 468-3: 39 dB (CCIR)   
Current consumption: 5.3 mA   

Output voltage;
Logic out: high level output voltage > 2.4 V, low level output voltage < 0.4 V   
Logic in: high level input voltage > 2.0 V, low level input voltage < 0.8 V

Acoustics: boundary layer microphone   
Colour: LED light ring: red / green   
Dynamic range: 111 dB (A)   
Sensitivity: 10 mV/Pa   

What's in the box?
MEB 114 Microphone
Quickguide
Cable